Canon NP6621 Service Manual page 220

MECHANICAL SYSTEM
2
1
Figure 4-351 (left)
3) Slide out the paper deck slowly to the front.
3. Removing the Lifter Wire
1) Remove the paper deck.
2) Remove the deck front cover.
3) Remove the two screws
deck and remove the guide plate
front and rear.
1
Figure 4-352
4–28
from the inside of the
from both
2
COPYRIGHT © 1998 CANON INC.
4) Mark the position of the latch assembly, and
detach the latch assembly by removing the
mounting screws
total).
Figure 4-353a (left)
3
3
Figure 4-353b (right)
5) Remove the mounting screw
right, and remove the gear cover
Figure 4-354
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
on both left and right (6 in
3
3
from the front
.
5
4