Making Copies - Canon NP6621 Service Manual

GENERAL DESCRIPTION
B. Making Copies
1) Place your originals.
a. Placing originals on the platen glass
• Lift the platen glass cover.
• Place your original on the platen glass. The
surface that you want to copy must face
down. Align the edge of the original with the
mark in the centre of the platen glass.
• Gently lower the platen glass cover.
Figure 1-403
b. Placing originals in the ADF or RDF (option)
• Adjust the slide guides to fit the size of your
originals.
• Neatly stack your originals face up in the
original tray.
Figure 1-404
2) Programme the copy settings.
• Press the -
0
9
copies.
• Press the -
exposure.
• Press the key to select the copy paper size.
• Press the -
copy ratio.
1–16
keys to enter the number of
keys to adjust the copy
keys to select a preset
COPYRIGHT © 1998 CANON INC.
3) Press the key.
a. After copying begins, you cannot change the
number of copies, paper size, copy ratio or
other copy settings.
b. The copier's counter automatically counts up
one as each copy is output to the copy tray.
Figure 1-405
c. If you want to stop the copier before copying is
complete, press the
Reference:
Pressing the key will not clear the copy
settings. To clear the copy settings, press the
key.
N
Figure 1-406
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
1 2
4 5
7 8
C 0
key.
1 2 3
4 5 6
7 8 9
A
C 0