Canon NP6621 Service Manual page 218

MECHANICAL SYSTEM
7. Removing the Pick-Up Clutch
1) Remove the pick-up drive unit. (See "Removing
the Pick-Up Drive Unit.")
2) Remove the cassette motor. (See "Removing
the Cassette Motor.")
3) Remove the three screws
then, remove the side plate
clutch .
4
Figure 4-343
8. Removing the Cassette Driver PCB
1) Remove the rear cover.
2) Disconnect all connectors from the cassette
driver PCB .
3) Remove the three screws
driver PCB .
2
Figure 4-344
4–26
and bushing
and the pick-up
2
3
1
, and remove the
1
COPYRIGHT © 1998 CANON INC.
9. Removing the Pick-Up Motor (Cas-
sette Pedestal-K1)
1) Remove the upper rear cover.
2) Remove the two screws
connector
;
1
10.Removing the Pick-Up Clutch (Cas-
sette Pedestal-K1; cassettes 3, 4)
1) Remove the upper rear cover.
2) Remove the pick-up motor.
3) Disconnect the two relay connectors
1
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
, and disconnect the
; then, remove the motor
3
1
Figure 4-345
Figure 4-346
.
2
.