Canon NP6621 Service Manual page 236

MECHANICAL SYSTEM
8) Remove the side seal
Figure 4-609
15
Figure 4-610
4–44
. (both sides)
15
COPYRIGHT © 1998 CANON INC.
4. Installing the Side Seal and the Blade
Assembly
1) Clean the area where the side seal will be
installed with alcohol.
2) Attach the side seal as indicated in Figure 4-
611.
Figure 4-611
3) Check that the side seal and the container are
in firm contact.
4) In European model, push the developing blade
unit attachment section all the way against the
upper side and secure it with the screw.
*
Some spacers are glued top and
bottom in reverse; however, regardless
of the spacer positions, attach the
unit by pushing it all the way against
the Upper side.
Figure 4-612
In other model, engage both ends of the blade
assembly with the developing aseembly, and
tighten the two screws
1
Figure 4-613
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
2