Installation - Canon NP6621 Service Manual

B. Installation
1) Remove the copier's bottom cassette.
2) Remove the two screws, and remove the copier's
front right cover; then, disengage the snap, and
remove the front lower cover.
Front lower
cover
Figure 5-702
3) Remove the left cover (4 screws), front upper
cover (2 screws), front left cover (3 screws), and
rear cover (4 screws); then, remove the two
screws, and remove the face plate.
Rear cover
Face plate
Left cover
Figure 5-703
COPYRIGHT © 1998 CANON INC.
Front right cover
Front upper cover
Front left cover
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
4) Remove the paper deck.
5) Install the power cord mount. (Use the mounting
screw removed from the face plate.)
Power cord mount
Mounting screws
Figure 5-704
6) Install the stay with one mounting screw (white;
M4 6).
Stay
Figure 5-705

INSTALLATION

Screw
5–25