Table of Contents
Advertisement
The Machine Connected via WSD Port Is Not Displayed
During Driver Installation
Troubleshoot by checking the items below.
Check the Settings of the Machine.
Configure the settings below if they have not been configured.
The machine must be restarted to apply the settings.
WSD Printing and Multicast Discovery Settings
Log in to Remote UI in System Manager Mode
Settings]
[Edit]
the machine.
On the control panel, select [Menu] in the [Home] screen, and then select [Preferences] to configure the
settings.
[WSD Settings](P. 442)
Selecting the Page Description Language
Select the page description language (PDL) of the installed driver.
Log in to Remote UI in System Manager Mode
(Plug and Play)]
On the control panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the
settings.
[Network](P. 477)
Check the OS Network Settings.
Configure the settings below if they have not been configured.
In Windows, click [
properties]
[Network profile]
Check Whether the Driver Is Installed.
Use the following procedure to check whether the driver of the machine is displayed.
In Windows, click [
driver is displayed.
If the driver is displayed, it is installed. In this case, uninstall the driver, and then reinstall it.
For details about uninstalling and installing drivers, see the driver manual at the online manual site.
https://oip.manual.canon/
Troubleshooting
select the [Use WSD Printing] and [Use Multicast Discovery] checkboxes
[Edit]
select the PDL in [Network]
] (Start)
[
] (Settings)
[Private]
] (Start)
[
] (Settings)
[Settings/Registration]
[Settings/Registration]
[OK]
restart the machine.
[Network & Internet]
[Devices]
[Printers & scanners]
582
[Network Settings]
[WSD
[OK]
[Printer Settings]
[PDL Selection
[Status]
[Change connection
check whether the
8WFY-0E2
restart
Advertisement
Table of Contents
