Drum Heater - Canon NP6621 Service Manual

D. Drum Heater*
* This may not be available for sale in some areas.
1. Installing the Drum Heater
1) Remove the transfer guide from the copier.
2) Install the cord clamp
1
Figure 4-509
3) Put the heater unit
Figure 4-510
COPYRIGHT © 1998 CANON INC.
to the heater holder
2
into the heater holder.
3
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
4) Install the heater holder
with two screws
.
4
5) Install the transfer guide to the copier.
6) Connect the connector
copier's connector.
Caution:
As necessary, keep the heater harness in place
on the cord guide using tie-wraps.
MECHANICAL SYSTEM
to the transfer guide
.
6
5
4
FIgure 4-511
of the heater to the
Figure 4-512
7
4–41