Table of Contents
Advertisement
4. Points to Note When Installing the
Pick-Up Roller
When installing the pick-up roller
that the marking
shown in Figure 4-338 is toward
the rear.
2
Figure 4-338
5. Removing the Pick-Up Unit
1) Remove the rear cover and the right cover.
2) Remove the screw
Figure 4-339
3) Remove the screw
guide
.
2
Figure 4-340
COPYRIGHT © 1998 CANON INC.
, install it so
1
.
1
, and remove the harness
3
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
4) Remove the four screws
two connectors
; then, remove the pick-up
drive unit
.
4
6
4
5
4
Figure 4-341
6. Removing the Cassette Motor
1) Remove the rear cover.
2) Remove the two screws
connector (J114)
1
Figure 4-342
MECHANICAL SYSTEM
, and disconnect the
5
, and disconnect the
; then, remove the motor
3
2
1
4–25
.
Advertisement
Chapters
Table of Contents
