Initializing User Mode - Canon NP6621 Service Manual

11. Initializing User Mode

• The settings that were changed in the Additional
Functions mode can be restored to their initial
settings.
Aditional
Function
1) Press the key.
• "U01" appears in the Copy quantity/Copy
ratio display.
• Once you set the Additional Functions mode,
the key turns red and copying operations
cannot be initiated.
2) Press the key twice.
0
• If you make a mistake while entering a value,
press either the
0
and then press the
3) Press the key.
OK
• "–1" is displayed in the Copy quantity/Copy
ratio display.
4) Press the key.
0
• "–0" is displayed in the Copy quantity/Copy
ratio display.
• If you make a mistake while entering a value,
enter the correct value and it will replace the
incorrect one that was previously entered, or
press the key and after the display clears,
C
enter the correct value.
5) Press the key.
OK
• The Additional Functions are initialized and
"U00" is displayed.
Note:
If the key is pressed before the
pressed, the Additional Functions are not initial-
ized, and the copier will return to the normal
copying mode.
COPYRIGHT © 1998 CANON INC.
key twice or press the
C
key twice.
0
key is
OK
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
key
GENERAL DESCRIPTION
1–25