Canon NP6621 Service Manual page 264

INSTALLATION
5) Put the screw back, and tighten it.
6) Insert the bend found at the rear of the heater
into the heater mounting hole in the copier's
rear plate.
Figure 5-606
7) Fix the mounting plate 1 in place to the copier's
side plate with two screws (white; M3 6).
Screws
Figure 5-607
5–18
Heater mounting hole
Cassette heater
COPYRIGHT © 1998 CANON INC.
8) Connect the copier's connector to the connector
on the cassette heater visible at the rear of the
copier.
Figure 5-608
9) Install the copier's rear cover, front lower cover,
and front cover.
10) Slide both top and bottom cassettes back in.
11) Open the copier's top unit.
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Connector on
the heater
Connector on
the copier