Table of Contents
Advertisement
Chapter 3
3.6.1.3 The former procedure of removing the Fixing
Assembly
LBP5000
1) Remove the delivery tray. (page 3-7)Reference[Removing the Delivery
Tray]
2)
Remove
the
right
cover/right
3)Reference[Removing the Right Cover/Right Cassette Cover]
3) Remove the upper cover. (page 3-5)Reference[Removing the Upper
Cover]
4)
Remove
the
left
cover/left
4)Reference[Removing the Left Cover/Left Cassette Cover]
5) Remove the face-down cover. (page 3-7)Reference[Removing the Face-
Down Cover]
3.6.1.4 Removing the Fixing Assembly
LBP5000
Before starting the work, be sure to turn off the power switch, and disconnect
the power cord.
If the machine has been operating, it is most likely that the fixing assembly
is extremely hot. Wait until the assembly has cooled enough before starting
to remove it.
1) Disconnect the 4 connectors [1].
2) Free the cable from the harness retainer [1].
3) Remove the 3 connectors [1].
4) Remove the fixing assembly [1].
- 3 screws [2]
3-36
cassette
cover.
(page
cassette
cover.
(page
F-3-247
F-3-248
F-3-249
0011-1036
3-
3-
3.6.2 Fixing Film Unit
0010-7236
3.6.2.1 Preparation for Removing the Fixing Film
LBP5100
1) Remove the delivery tray. (page 3-7)Reference [Removing the Delivery
Tray]
2) Detach the rear cover. (page 3-2)Reference [Removing the Rear Cover]
3) Detach the right cover. (page 3-2)Reference [Removing the Right Cover
/ Right Cassette Cover]
4) Detach the upper cover. (page 3-5)Reference [Removing the Upper
Cover]
5) Detach the left cover. (page 3-4)Reference [Removing the Left Cover /
Left Cassette Cover]
6) Detach the face-down cover. (page 3-7)Reference [Removing the Face-
Down Cover]
7) Remove the fixing assembly. (page 3-35)Reference [Removing the
Fixing Assembly]
3.6.2.2 Removing the Fixing Film
LBP5100
1) Remove the 3 flappers [1].
2) Remove the delivery drive unit [1].
- 2 screws [2]
3) Remove the delivery lower guide [1].
- 1 screw [2]
F-3-250
F-3-251
F-3-252
0015-7599
0015-7600
Advertisement
Table of Contents
