Configuring Wpa2 With Radius - NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual

NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
Figure 2-14.
2. Enter the preshared key passphrase (Network Key).
3. Wireless Client Security Separation is disabled by default. If enabled, associated wireless
clients will not be able to communicate with each other. (This feature is intended for hotspots
and other public access situations.
4. Click Apply to save your settings.

Configuring WPA2 with RADIUS

Not all wireless adapters support WPA2. Furthermore, client software is required on the client.
Make sure your client card supports WPA2. Consult the product document for your wireless
adapter and WPA2 client software for instructions on configuring WPA2 settings.
To configure WPA2 with RADIUS:
1. Under Security on the main menu, select RADIUS Server Settings. The Select RADIUS
Server Settings screen will display.
2. Enter the RADIUS settings as shown in
on page 2-21.
3. Click Apply to save your RADIUS settings
4. Select Security Profile Settings under Security on the main menu, When the screen displays,
check the radio button of the Security Profile you are editing and click Edit.
Basic Installation and Configuration
"Configuring RADIUS Server Settings (if required)"
v4.0, April 2006
2-27