Altigen AltiContact Manager Version 5.0A Administration Manual page 181

Note:
When adding a feature profile, the system will automatically
assign the lowest available number. For example, if 0, 1, 2 and 4
are already assigned, the system will assign "3" to the next feature
profile and not "5".
Select or de-select the checkboxes for the desired AltiServ feature codes
that will be associated with this feature profile, then click Apply.
After the System Administrator creates a Feature Profile, the Feature
Profile can be assigned to a specific extension from the General page of
Extension Configuration. (See "Feature Profile" on page 14-14 for more
information on assigning a feature profile to an extension.)
Figure 21. Feature Profile option, Extension Configuration
Important: When assigning a feature profile (for example: 2 - Sales
Group) to an extension in Extension Configuration, and this
assigned feature profile is deleted in the Feature Profiles page
in System Configuration, if a new feature profile (for
example: 2 - Marketing Group) is assigned that shares the
same number, the extension will automatically be assigned to
the new feature profile. So, it is important to note which
extensions are assigned to certain feature profiles, especially
when adding new profiles or deleting old ones.
AltiContact Manager Administration Manual 5-33
System Configuration