Table of Contents
Advertisement
2.
Press Previous or Next until the screen displays Autoloader Information. Press Enter to select.
By using Previous or Next, you can select from the following information screens:
Autoloader Time
Firmware rev.
Product ID
Serial number
SCSI ID and LUN (SCSI devices only)
Slots and Mailslots
Odometer
Power On Time
Drive information (Status/Information > Drive Information)
To obtain drive information:
1.
From the Home screen, press Previous or Next until the screen displays Status/Information.
Press Enter to select.
2.
Press Previous or Next until the screen displays Drive Information. Press Enter to select.
3.
By using Previous or Next, you can select from the following information screens:
Serial number
Drive type
Firmware revision
SCSI ID (parallel SCSI tape drives only)
Component status (Status/Information > Component Status)
To obtain component status:
1.
From the Home screen, press Previous or Next until the screen displays Status/Information.
Press Enter to select.
2.
Press Previous or Next until the screen displays Component Status. Press Enter to select.
3.
By using Previous or Next, you can select from the following information screens:
Drive activity
Autoloader status
Drive status
Fan status
The second line of the screen will display one of the following:
Good — the component is operating normally.
Warning — the component might have an issue that should be addressed. The device is
functional.
Critical — the component has an error condition that should be addressed. The device
may not be fully functional.
Failed — the component has a known failure and should be replaced.
Network information (Status/Information > Network Information)
To access network settings for the device:
1.
From the Home screen, press Previous or Next until the screen displays Status/Information.
Press Enter to select.
Operator control panel (OCP)
71
- Quick Links:
- Back Panel Overview
Hide quick links:
Advertisement
Table of Contents
