Table of Contents
Advertisement
2.
In Management View, from the Settings tab dropdown menu, choose NTP
Management.
3.
Click the Start Time Sync button.
4.
Click the OK button in the notification dialog box.
Viewing the Runtime Event Log
Runtime Events lists information about the 1023 most recent runtime events
recorded since the system was started. To view runtime events:
1.
In Tree View, click the Subsystem
2.
In Management View, click the Events tab dropdown menu and choose
Runtime Events.
Events are displayed by:
•
Item Number – A consecutive decimal number assigned to a specific
event
•
Device – Battery, controller, logical drive, physical drive, port, etc.
•
Event ID – The hexadecimal number that identifies the specific type of
event
•
Severity – Information, Warning, Minor, Major, Critical, and Fatal. The
severity level is user-specified. See ―Setting-up User Event
Subscriptions‖ on page 77.
•
Time – Time and date of the occurrence
•
Description – A brief description of the event
3.
Click the link at the top of the column by which you want to sort the events.
After you click the item, a triangle icon appears.
•
If the triangle points upward, the column is sorted low-to-high or old-to-
new.
•
If the triangle points downward, the column is sorted high-to-low or new-
to-old.
Click the link a second time to change to flip the triangle and reverse the sort
sequence.
Saving the Runtime Event Log
To save the runtime event log as a text file:
1.
In Tree View, click the Subsystem
2.
In Management View, click the Events tab dropdown menu and choose
Runtime Events.
3.
Click the Save Event Log button.
Chapter 4: Management with ASUS Storage Management
icon.
icon.
67
Advertisement
Table of Contents
