Locating A Power Supply; Viewing Cooling Unit Status; Viewing Voltage Sensor Status; Viewing Temperature Sensor Status - Asus DS300i User Manual

User manual
Hide thumbs Also See for DS300i:
Table of Contents

Advertisement

Locating a Power Supply

To locate a power supply:
1.
From the Main Menu, highlight Subsystem Management and press Enter.
2.
Highlight Enclosure Management and press Enter.
3.
Highlight Power Supplies and press Enter.
4.
Highlight Locate Power Supply and press Enter.
The LED on the selected power supply blinks for one minute.

Viewing Cooling Unit Status

To view the status of the blowers:
1.
From the Main Menu, highlight Subsystem Management and press Enter.
2.
Highlight Enclosure Management and press Enter.
3.
Highlight Cooling Units and press Enter.
The screen displays the status and speed of ASUS Storage's cooling fans. If
the speed is below the Healthy Threshold, there is a fan malfunction. See
―Replacing a Cooling Fan‖ on page 313.

Viewing Voltage Sensor Status

To view the status of the voltage sensors:
1.
From the Main Menu, highlight Subsystem Management and press Enter.
2.
Highlight Enclosure Management and press Enter.
3.
Highlight Voltage Sensors and press Enter.
If any voltage is outside the Healthy Threshold values, there is a voltage
malfunction in the enclosure. See ―Chapter 10: Troubleshooting‖ on
page 355.

Viewing Temperature Sensor Status

To view the status of the temperature sensors:
1.
From the Main Menu, highlight Subsystem Management and press Enter.
2.
Highlight Enclosure Management and press Enter.
3.
Highlight Temperature Sensors and press Enter.
If any temperature exceeds the Healthy Threshold value, there is an
overheat condition in the enclosure. See ―Setting Temperature Thresholds‖
on page 219 and ―Chapter 10: Troubleshooting‖ on page 355.
Chapter 6: Management with the CLU
218

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds300f

Table of Contents