Table of Contents
Advertisement
LCD Panel
The LCD panel activates approximately 35 seconds after you switch on the
ASUS Storage's power supply.
At first, the LCD screen displays
When the ASUS Storage DS300f or DS300i subsystem is fully booted and
running under normal conditions, the LCD screen shows ASUS Storage and IP
address, as shown in Figure 20.
Figure 20. ASUS Storage optional LCD display
This completes the power and start-up.
For setup instructions, see ―Chapter 3: ASUS Storage Setup‖ on page 39.
Installing Smart NAS Console
Smart NAS Console software enables you to manage your ASUS Storage
subsystem when it is configured as Network Attached Storage (NAS). The
NAS option requires:
•
An iSCSI SAN data connection, see page 27.
•
Logical drives configured for NAS, see page 51.
To install Smart NAS Console:
1.
Open the software CD, find the Smart NAS Console install icon (right),
and drag it to your PC's desktop.
2.
Double-click the Smart NAS Console Install icon to begin installation.
3.
In the Welcome screen, click the Next button.
4.
In the License screen, choose the I accept the terms... option and click the
Next button.
5.
In the Choose Destination folder, click the Browse... button if you do not
agree with the proposed destination folder.
When you have chosen the destination folder, click the Next button.
6.
In the Ready to Install screen, click the Install button.
Chapter 2: ASUS Storage Installation
System is Initializing
3
6
.
Advertisement
Table of Contents
