Table of Contents
Advertisement
Verifying
To verify the results of the automatic disk array creation:
1.
From the default screen, press the
Logical Disk Management.
2.
Press the
3.
Press the
4.
From the default screen, press the
information for the logical drive.
Creating a Disk Array – Advanced
Creating a Disk Array
For more information on the choices below, see ―Chapter 9: Technology
Background‖ on page 319.
To create a disk array:
1.
Press the
2.
Press the
3.
Press the
4.
Press the
5.
Press the
6.
Press the
number.
7.
Press the
choose a physical drive for your array.
Note that you cannot mix HDDs and SSDs in the same disk array.
8.
Press the
choices.
9.
Press the
The display shows the array creation process. When the creation is finished,
the LCD returns to Disk Array Create.
Creating a Logical Drive
For more information on the choices below, see ―Chapter 9: Technology
Background‖ on page 319.
To create a logical drive on your new disk array:
1.
Press the
button and the display says 000.
button again to choose this logical drive.
or
button until the display says Array Configure.
button and the display says Auto Configure.
or
button until the display says Advanced Configure.
button and the display says Disk Array Create.
button again and the display says Physical Drive Select.
button again to display the available physical drives by
button to move through the list. Press the
button to move to END and press the
button again to confirm.
button and the display says Logical Disk Create.
or
button until the display says
or
buttons to scroll through the
294
Managing Disk Arrays
button to
button to input your
Advertisement
Table of Contents
