Initial Connection; Making A Serial Connection - Asus DS300i User Manual

Initial Connection

Making an initial connection includes the following functions:
•
Making a Serial Connection (below)
•
Making a Telnet Connection (page 205)
•
Logging In (page 205)
•
Accessing Online Help (page 207)
•
Exiting the CLU (page 207)
•
Logging Out of the CLI (page 207)
•
Logging Back Into the CLI and CLU (page 207)

Making a Serial Connection

Before you begin, be sure the RJ11-to-DB9 serial data cable is connected
between the Host PC and ASUS Storage subsystem, and that both machines are
booted and running.
Figure 1. Serial port on the controller
Then do the following actions:
1. Change your terminal emulation program settings to match the following
specifications:
•
Bits per second: 115200
•
Data bits: 8
•
Parity: None
•
Stop bits: 1
•
Flow control: none
2. Start your PC's terminal VT100 or ANSI emulation program.
3. Press Enter once to launch the CLI.
Serial port
204
Chapter 6: Management with the CLU