Connecting The Power; Front Panel Leds - Asus DS300i User Manual

Connecting the Power

Plug-in the power cords and turn on the switches on both power supplies.
When the power is switched on, the LEDs and LCD screen light up.

Front Panel LEDs

When boot-up is finished and the ASUS Storage DS300f or DS300i subsystem
is functioning normally:
•
Power, Global Enclosure Status, and Global RAID Status LEDs display
green continuously.
•
Controller Activity LED flashes green when there is controller activity.
•
System Heartbeat LED blinks green seven times in three seconds, goes
dark for six seconds, then repeats the pattern.
Figure 16. ASUS Storage subsystem front panel LED display
If you have a SAN, DAS, or JBOD expansion, always power on
the JBOD expansion units first.
Chapter 2: ASUS Storage Installation
Important
Power
Global Enclosure Status
Global RAID Status
Controller Activity
Reserved
System Heartbeat
3
3