Table of Contents
Advertisement
Updating the Firmware in the CLU
A firmware update consists of the following actions:
•
Downloading the Firmware Image File (page 309)
•
Updating the Firmware (page 309)
•
Restarting Subsystem over a Telnet Connection (page 309)
•
Restarting Subsystem over a Serial Connection (page 310)
Downloading the Firmware Image File
Go to the ASUS support web site http://support.asus.com/ and download the
latest firmware image file to your TFTP server.
Updating the Firmware
To update the firmware file in the CLU:
1.
From the Main Menu, highlight Additional Info and Management, and press
Enter.
2.
Highlight Flash through TFTP and press Enter.
3.
Highlight TFTP Server and type the IP address of your TFTP server in the
field provided.
4.
Highlight Port Number and press the backspace key to erase the current
value, then type the new value. 69 is the default.
5.
Highlight File Name and type the file name of the firmware image file in the
field provided.
6.
Highlight Start and press Enter.
A message appears to tell you to reboot the ASUS Storage subsystem.
7.
Restart the ASUS Storage subsystem.
See ―Restarting Subsystem over a Telnet Connection‖ on page 309 or
―Restarting Subsystem over a Serial Connection‖ on page 310.
Restarting Subsystem over a Telnet Connection
Do not restart the ASUS Storage subsystem during a firmware
upgrade procedure. Wait until the upgrade is done and you are
prompted to restart.
Warning
309
Chapter 8: Maintenance
Advertisement
Table of Contents
