External Ports; Raid Support - Asus DS300i User Manual

User manual
Hide thumbs Also See for DS300i:
Table of Contents

Advertisement

Interfaces:
ASUS Storage Management, through browser and Ethernet
CLU and CLI, through serial and Telnet
Subsystem buzzer and LEDs

External Ports

High-availability DAS, NAS, SAN, and cluster-friendly platforms:
Dual 8 Gb/s FC host ports plus dual GbE iSCSI host ports
Four GbE iSCSI host ports
3 Gb/s SAS x4 JBOD expansion port.
10/100Mb RJ45 Ethernet management port.
RJ11 serial port supports RS232 protocol via adapter cable.
USB 2.0 external ports for subsystem management.

RAID Support

Automatic, Express, and Advanced RAID configuration options.
Supports RAID levels 0, 1, 1E, 3, 5, 6, 10, 30, 50, and 60.
Supports any combination of RAID levels at the same time.
Configurable stripe sizes: 64 KB, 128 KB, 256 KB, 512 KB, and 1 MB.
Multiple global or dedicated hot-spare drives with reversion option.
Up to 256 LUNs per subsystem.
Up to 32 logical drives (LUNs) per disk array.
Out-of-order logical drive deletion and re-creation.
LUN masking and mapping.
Extensive SCSI command set.
16-byte CDB for 64-bit LBA addressing.
Predictive Data Migration (PDM) replaces un-healthy disk member in array
and maintains I/O activity during the transition.
Hard/soft reset to recover HDD from bad status.
Power-control to recover HDD from hung status.
Write Hole Table to prevent RAID 5/6 inconsistent data.
Read/Write Check Table to prevent data content errors.
NVRAM event logging.
Chapter 1: Introduction to ASUS Storage
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds300f

Table of Contents