Creating Disk Arrays With Asus Storage Management; Logging Into Asus Storage Management - Asus DS300i User Manual

Creating Disk Arrays with ASUS Storage
Management
Setting up ASUS Storage Management consists of the following actions:
•
Logging into ASUS Storage Management (below)
•
Choosing a Language (page 48)
•
Creating Your Logical Drives (page 49)
•
Logging out of ASUS Storage Management (page 54)
•
Using ASUS Storage Management over the Internet (page 54)

Logging into ASUS Storage Management

1. Launch your Browser.
2. In the Browser address field, type the IP address of the ASUS Storage
subsystem.
Use the IP address you obtained in Task 7 (see page 41). Note that the IP
address shown below is only an example. The IP address you type into your
browser will be different.
Regular Connection
•
ASUS Storage Management uses an HTTP connection . . . . . .http://
•
Enter the ASUS Storage's IP address . . . . . . . . . . . . 192.168.10.85
Together, your entry looks like this:
http://192.168.10.85
Secure Connection
•
ASUS Storage Management uses a secure
HTTP connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .https://
•
Enter the ASUS Storage's IP address . . . . . . . . . . . . 192.168.10.85
Together, your entry looks like this:
https://192.168.10.85
3. When the log-in screen appears:
•
Type administrator in the User Name field.
•
Type password in the Password field.
Whether you choose a regular or a secure connection, your login
to ASUS Storage Management and your user password are
always secure.
Chapter 3: ASUS Storage Setup
Note
47