Network Menu; Network Setup; Network Control; Network Status - Panasonic PT-DS100XE Operating Instructions Manual

NETWORK menu

See "Navigating through the menu"
z
Æ
( page 50).
See "MAIN MENU" and "SUB MENU"
z
( Æ page 51).

NETWORK SETUP

Make the initial network settings before using the
network connection.
1 ) Press ▲▼ to select [NETWORK
SETUP].
2 ) Press <ENTER> button.
The [NETWORK SETUP] screen will be
z
displayed.
3 ) Press ▲▼ to select an item, and
change the setting according to the
instructions.
PROJECTOR
Change as needed when using
NAME
a DHCP server.
(Display of host
name and setting)
Set [DHCP] item to [ON] when
to acquire an IP address
automatically using the DHCP
DHCP
server.
(DHCP client
Set to [OFF] if [DHCP] server is
function)
not used. Enter the IP address if
DHCP server is not used.
IP ADDRESS
Enter the IP address if DHCP
(Display of IP
server is not used.
address and
setting)
SUBNET MASK
If not using a DHCP server, enter
(Displaying
the subnet mask.
and setting the
subnet mask)

DEFAULT

GATEWAY
Enter the gateway address if
(Display of gateway
DHCP server is not used.
address and
setting)
Save the current network
STORE
settings.
4 ) Press ▲▼ to select [STORE], and
press <ENTER> button.
NETWORK menu
Note
Before using the DHCP server, make sure the DHCP
z
server is already functioning.
For details of IP address, subnet mask, and gateway, ask
z
the network administrator.

NETWORK CONTROL

This sets the network control method.
1 ) Press ▲▼ to select [NETWORK
CONTROL].
2 ) Press <ENTER> button.
The [NETWORK CONTROL] screen will be
z
displayed.
3 ) Press ▲▼ to select items, and press
◄► to change the setting.
Set this to [ON] when you want
WEB
to perform control with the Web
CONTROL
browser.
Set this to [ON] when you want
PJLink
to perform control with the PJLink
CONTROL
protocol.
Set to [ON] to control using the
COMMAND
control command via the serial
CONTROL
Û
terminal. (
COMMAND Set the port number used for the
PORT command control.
Save the current network control
STORE
settings.
: If settings have been made without an
Û
administrator password of the Web browser
control, add 2-byte "00" instead of STX, and a line-
feed code (0Dh) instead of ETX. If settings have
been made with an administrator password of the
Web browser control, add a 32-byte hash value
and "00" instead of STX and a line-feed code (0Dh)
instead of ETX. The hash value is created by MD5
combining "admin1:", password, ":" and random
numbers. The random numbers are 8-byte values
sent from the projector when connecting.

NETWORK STATUS

This displays the network status of the main unit.
1 ) Press ▲▼ to select [NETWORK
STATUS].
2 ) Press <ENTER> button.
The [NETWORK STATUS] screen will be
z
displayed.
Æ page 120)
ENGLISH -
95