Basic Operations Using The Remote Control; Using The Shutter Function; On-Screen Display Function; Switching The Input Signal - Panasonic PT-DS100XE Operating Instructions Manual

Basic operations using the remote control

INPUT SELECT
ON SCREEN
TEST PATTERN
STATUS

Using the SHUTTER function

If the projector is not used for a certain period of
time during the meeting intermission, for example, a
shutter mode is available that allows the user to hide
images temporarily.
button
1 ) Press <SHUTTER> button on the
remote control or the main unit.
The projected light is blocked by the internal
z
shutter.
2 ) Press <SHUTTER> button again.
Projection resumes.
z
Note
The power indicator will flash while the SHUTTER
z
function is being used.

On-screen display function

This button electronically mutes the onscreen menus
to avoid disrupting the program.
button
Press <ON SCREEN> button on the
remote control.
Basic operations using the remote control

Switching the input signal

You can use the remote control to switch the signals
AUTO SETUP
that are being input and projected.
SHUTTER
Press <INPUT SELECT> button on the
ASPECT
remote control or the main unit.
FUNCTION RGB1
RGB2
DVI-D/
HDMI
VIDEO
S-VIDEO
SDI
: SDI: PT-DZ110XE/PT-DS100XE only
Û

STATUS function

Pressing this button displays several pages of
projector status information.
Press <STATUS> button on the remote
control.
The [STATUS] screen will be displayed.
z
STATUS
INPUT
SIGNAL NAME
SIGNAL FREQUENCY
PROJECTOR RUNTIME
LAMP1
LAMP2
INTAKE AIR TEMP.
OPTICS MODULE TEMP.
AROUND LAMP TEMP.
REMAINING FILTER
button
Switches to RGB1 input.
Switches to RGB2 input.
Switches to DVI-D or HDMI input.
If either of the inputs has already been
selected, the input switches to the
other.
Switches to VIDEO input.
Switches to S-VIDEO input.
Switches to SDI input.
Û
button
47
ENGLISH -