P In P Menu; Using The P In P Function; Setting The P In P Function - Panasonic PT-DS100XE Operating Instructions Manual

P IN P menu

P IN P menu
See "Navigating through the menu"
z
Æ
( page 50).
See "MAIN MENU" and "SUB MENU"
z
( Æ page 51).

Using the P IN P function

Two videos can be projected simultaneously by
placing a separate small sub screen within the main
screen.
1 ) Press ▲▼ to select [P IN P].
2 ) Press <ENTER> button.
The [P IN P] screen will be displayed.
z
3 ) Press ▲▼ to select [P IN P MODE],
and press <ENTER> button.
The [P IN P MODE] screen will be displayed.
z
4 ) Press ▲▼ to select a function.
OFF The P IN P function is not used.
USER1
The P IN P function is used with the
USER2 settings that were set in [Setting the
P IN P function].
USER3
5 ) Press <ENTER> button.

Setting the P IN P function

The settings of the P IN P function can be saved to
[USER1], [USER2], and [USER3].
1 ) Select one of [USER1], [USER2], and
[USER3] modes in Step 4) of "Using
the P IN P function", and press
<ENTER> button.
The setting screen for the selected mode is
z
displayed.
88
- ENGLISH
2 ) Press ▲▼ to select the desired setting
item, and press <ENTER> button.
The sub menu for the selected item appears.
z
The input terminal for the main window is
displayed. (Press ▲▼ to select an item, and
press <ENTER> button to switch to the item.)
SIZE :
MAIN
The user can specify the display size of the
WINDOW
main window between 10 % and 100 %.
POSITION :
The user can specify the display position of
the main window on the screen.
The input terminal for the subwindow is
displayed. (Press ▲▼ to select an item, and
press <ENTER> button to switch to the item.)
SIZE :
The user can specify the display size of the
sub window between 10 % and 100 %.
SUB
POSITION :
WINDOW
The user can specify the display position of
the subwindow on the screen.
CLOCK PHASE :
Set this if the pictures flicker or their outlines
blur when the subwindow is RGB1 or RGB2.
(Set between 0 and 63)
The user can select the window to apply frame
lock. (Press ◄► to switch windows.)
[MAIN WINDOW] :
FRAME
Frame lock is set for the input signals
LOCK specified for the main window.
[SUB WINDOW] :
Frame lock is set for the input signals
specified for the subwindow.
The user can select the window that is
displayed by priority when two windows
overlap. (Press ◄► to switch windows.)
TYPE
[MAIN WINDOW] :
The main window is displayed by priority.
[SUB WINDOW] :
The subwindow is displayed by priority.
Note
The P IN P function is not available depending on the
z
input signals and the selected input terminals. Refer to
"Two window display combination list" (
details.
The main window's picture adjustment values such as the
z
picture mode, gamma selection and color temperature
setting for the main window will be applied.
In the normal screen (when the menu is not displayed),
z
the ◄► buttons can be used to switch the size and
position of the main window and subwindow when the P
IN P function is on.
Æ
page 122) for