OSD DESIGN
J
This sets the color of the on-screen display (OSD).
1 : Yellow
6 : Brown
5 : Pink
OSD MEMORY
J
The current menu cursor position will be retained
temporarily unless the projector switched off.
ON
INPUT GUIDE
J
This sets whether to display the currently
selected input guide at the position set for [OSD
POSITION].
ON
WARNING MESSAGE
J
This sets the display of warning messages.
ON
BACK COLOR
This sets the color for the projection screen when no
signals are being input.
1 )
Press ▲▼ to select [BACK COLOR].
2 )
Press ◄► to switch [BACK COLOR].
The setting will change as follows each time
z
◄► is pressed.
BLUE
LOGO2
The entire projection area will
BLUE
appear blue.
The entire projection area will
BLACK
appear black.
The picture registered by the user
LOGO1
will be projected in the projection
area.
LOGO2
The Panasonic logo is projected.
Note
Separate software is required in order to create the
z
pictures to use for [LOGO1]. Consult your dealer.
2 : Blue
STARTUP LOGO
3 : White
This sets the startup logo that is projected when the
power is turned on.
4 : Green
1 )
Press ▲▼ to select [STARTUP LOGO].
2 )
Press ◄► to switch [STARTUP LOGO].
OFF
LOGO2
OFF
Note
Separate software is required in order to create the
z
pictures to use for [LOGO1]. Consult your dealer.
STARTUP LOGO will be displayed for 15 seconds.
z
OFF
FREEZE
You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
1 )
Press ▲▼ to select [FREEZE].
2 )
Press <ENTER> button.
BLACK
LOGO1
DISPLAY OPTION menu
The setting will change as follows each time
z
◄► is pressed.
NONE
LOGO2
The Panasonic logo is projected.
NONE
No startup logo is projected.
The picture registered by the user
LOGO1
will be projected.
Press <MENU> button to escape.
z
LOGO1
75
ENGLISH -