Automatic Adjustment; Using The Function Button; Displaying The Internal Test Pattern - Panasonic PT-DS100XE Operating Instructions Manual

Basic operations using the remote control

Automatic adjustment

The automatic setup function can be used to
automatically adjust the resolution, clock phase and
picture position when analog RGB signals consisting
of bitmap images such as computer signals are being
input, or to automatically adjust the picture position
when DVI-D/HDMI signals are being input.
It is recommended to supply images with a bright
white frame at the outermost periphery containing
characters etc. that are clear in white and black
contrast when the system is in automatic adjustment
mode.
Avoid supplying images that involve halftones
or gradation such as photographs and computer
graphics.
button
Press <AUTO SETUP> button on the
remote control or the main unit.
A message [COMPLETE] appears if adjustment is
z
ended normally.
Note
[CLOCK PHASE] may have been shifted even when the
z
adjustment ended normally. In this case, manually adjust
the [CLOCK PHASE].
Refer to "CLOCK PHASE" of "POSITION menu"
( Æ page 61) for details.
If an image with blurred edges or a dark image is input,
z
[INCOMPLETE] may appear or adjustment may not
be performed properly even if [COMPLETE] appears.
In this case, manually adjust the items of "INPUT
RESOLUTION" of "ADVANCED MENU" (
"SHIFT" and "CLOCK PHASE" of "POSITION menu"
( Æ pages 59, 61).
For specific signals, adjustment should be made
z
according to "AUTO SETUP" of "DISPLAY OPTION
Æ
menu" ( page 72).
[AUTO SETUP] may not be available depending on the
z
machine type of the personal computer.
Automatic adjustment may not available for
z
synchronization signal of C-SYNC and G-SYNC.
Image may be distorted for several seconds during
z
automatic adjustment. This is not a malfunction.
For every supplied signal, adjustment is required.
z
Automatic adjustment can be canceled by pressing
z
<MENU> button during the course of automatic
adjustment.
Even for an RGB signal for which automatic setup is
z
possible, if automatic setup is performed while moving
images are being input, [INCOMPLETE] may appear,
or adjustment may not be performed properly even if
[COMPLETE] appears.
48
- ENGLISH

Using the FUNCTION button

[DISABLE], [SUB MEMORY], [SYSTEM SELECTOR],
[SYSTEM DAYLIGHT VIEW], [FREEZE], [P IN P],
or [WAVEFORM MONITOR]
assigned to <FUNCTION> button on the remote
control so that it can be used as an easy shortcut
button.
Press <FUNCTION> button on the remote
control.
: PT-DZ110XE only
Û
Note
Refer to
z
menu" (
Displaying the internal
test pattern
The projector has 9 types of internal test patterns to
check the condition of the set.
To display test patterns, follow the steps below.
1 ) Press <TEST PATTERN> button.
2 ) Press ◄► to select [TEST PATTERN].
Note
Setting is also possible by using an on-screen menu.
z
Æ page 65),
Refer to "TEST PATTERN menu" (
Adjustment of the image, picture quality, position, size
z
and other factors will not be reflected in test patterns. Be
sure to display an actual input signal before performing
these adjustments.
operations can be
Û
button
"FUNCTION BUTTON" of "PROJECTOR SETUP
Æ
page 85) for details.
button
Æ page 89) for details.