Control Device Setup - Panasonic PT-DS100XE Operating Instructions Manual

SECURITY menu

CONTROL DEVICE SETUP

Control from the remote control and main unit controls
can be restricted.
1 ) Press ▲▼ to select [CONTROL
DEVICE SETUP].
2 ) Press <ENTER> button.
The [CONTROL DEVICE SETUP] screen will
z
be displayed.
3 ) Press ▲▼ to select [CONTROL
PANEL] or [REMOTE CONTROLLER].
4 ) Press <ENTER> button.
[ CONTROL PANEL] screen or [REMOTE
z
CONTROLLER] screen will be displayed.
CONTROL PANEL
J
Restriction of control from the main unit controls
z
can be set.
Enables control from the main unit
ENABLE
controls.
Disables control from the main unit
DISABLE
controls.
REMOTE CONTROLLER
J
Restriction of control from the remote control
z
can be set.
Enables control from the remote
ENABLE
control.
Disables control from the remote
DISABLE
control.
5 ) Press ▲▼ to select [ENABLE] or
[DISABLE], and press <ENTER>
button.
The confirmation screen will be displayed.
z
6 ) Press ◄► to select [OK], and press
<ENTER> button.
Note
If an attempt is made to control the projector from the
z
remote control or main unit controls when [DISABLE] is
set, the [SECURITY PASSWORD] screen appears.
To change a setting, enter the security password and
change the operation setting.
The [SECURITY PASSWORD] screen disappears if
z
<MENU> button is pressed or no operation is performed
for 10 seconds.
If you [DISABLE] both of the [CONTROL PANEL] and
z
[REMOTE CONTROLLER] buttons, you cannot return to
the standby mode. Use this function with utmost care.
If a setting is reflected, the on-screen menu disappears.
z
To continue operation, press <MENU> button to display
the main menu.
94
- ENGLISH