Picture Menu; Picture Mode; Picture Mode Standard - Panasonic PT-DS100XE Operating Instructions Manual

PICTURE menu

See "Navigating through the menu"
z
Æ
( page 50).
See "MAIN MENU" and "SUB MENU"
z
( Æ page 51).

PICTURE MODE

The user can switch to the desired picture mode
suitable for the image source and the environment in
which this projector is used.
1 ) Press ▲▼ to select [PICTURE MODE].
2 ) Press ◄► to switch [PICTURE MODE].
The setting will change as follows each time
z
◄► is pressed.
STANDARD CINEMA
USER
GRAPHIC
The picture becomes suitable for
STANDARD
moving images in general.
The picture becomes suitable for
CINEMA
movie sources.
NATURAL The picture complies with sRGB.
The picture becomes similar to
DICOM SIM.
DICOM Part14 gray scale.
The light output is maximized for use
DYNAMIC
in bright areas.
The picture becomes suitable for
GRAPHIC
input from to the personal computer.
You can set your favorite picture
USER
mode.
Note
Factory defaults are [GRAPHIC] for RGB system and
z
[STANDARD] for moving images.
DICOM is an abbreviation for "Digital Imaging and
z
Communication in Medicine", which is a standard for
medical imaging devices. Although the name "DICOM" is
used, this projector is not a medical device. Accordingly,
do not use the projected images for medical diagnosis or
similar usage.
When <ENTER> button is pressed while a [PICTURE
z
MODE] other than [USER] is selected, the setting is
saved and will be used as the preset value next time
a signal is inputted. At this time, all the data except
[SYSTEM SELECTOR] in the [PICTURE] menu are
saved.
The factory default of [USER] is the image conformed to
z
ITU-R BT.709 Standard.
Changing the name of [USER]
J
1. Select [USER] in step 2).
2. Press <ENTER> button.
A screen showing details of the [PICTURE
z
MODE] will be displayed.
3. Press ▲▼ to select [PICTURE MODE
NATURAL
NAME CHANGE].
4. Press <ENTER> button.
DICOM SIM.
The [
z
screen will be displayed.
DYNAMIC
PICTURE MODE NAME CHANGE
5 ) Press ▲▼◄► to select characters
and press <ENTER> button to input
them.
6. Press ▲▼◄► to select [OK], and
press <ENTER> button.
The picture mode name is changed.
z
PICTURE menu
PICTURE MODE NAME CHANGE]
53
ENGLISH -