[Network] Menu; [Ethernet Type]; [Digital Link]; [Lan] - Panasonic PT-CMZ50 Operating Instructions Manual

[NETWORK] menu

On the menu screen, select [NETWORK] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (x page 63) for the operation of the menu screen.
f To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module
(Model No.: AJ-WM50 Series).

[ETHERNET TYPE]

Set the path for transmitting the Ethernet signal.
1) Press as to select [ETHERNET TYPE].
2) Press qw to switch the item.
f The items will switch each time you press the button.

[LAN]

[DIGITAL LINK]

[LAN & DIGITAL LINK]
Note
f When [ETHERNET TYPE] is set to [LAN], the Ethernet and serial control signals cannot be transmitted via the optional DIGITAL LINK output
supported device (Model No.: ET-YFB100G, ET-YFB200G) connected to the <DIGITAL LINK/LAN> terminal.
f When [ETHERNET TYPE] is set to [LAN & DIGITAL LINK], the <DIGITAL LINK/LAN> terminal and the <LAN> terminal are connected inside
the projector. Do not directly connect the <DIGITAL LINK/LAN> terminal and the <LAN> terminal using a LAN cable. Construct the system
so that it is not connected to the same network via the peripherals such as the switching hub or the twisted-pair-cable transmitter.
[DIGITAL LINK]
Make settings and operations related to DIGITAL LINK.
[DIGITAL LINK MODE]
Switch the communication method of the <DIGITAL LINK/LAN> terminal of the projector.
1) Press as to select [DIGITAL LINK].
2) Press the <ENTER> button.
f The [DIGITAL LINK] screen is displayed.
3) Press as to select [DIGITAL LINK MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[DIGITAL LINK]
[LONG REACH]
[ETHERNET]
Possible communication modes
l: Communication possible
―: Communication not possible
Setting
[AUTO]
[DIGITAL LINK]
[LONG REACH]
Chapter 4 Settings - [NETWORK] menu
Select this item when using only the <LAN> terminal to transmit the Ethernet signal.
Select this item when using only the <DIGITAL LINK/LAN> terminal to transmit the Ethernet signal.
Select this item when using the <DIGITAL LINK/LAN> terminal and the <LAN> terminal to transmit
the Ethernet signal.
Switches the communication method automatically to DIGITAL LINK, long reach or Ethernet.
Fixes the communication method to DIGITAL LINK.
Fixes the communication method to long reach.
Fixes the communication method to Ethernet.
(100 m (328'1"))
For DIGITAL LINK
For long reach
For Ethernet
Communication possibility
Image transfer Image transfer
(150 m (492'2"))
l
―
―
l
―
Ethernet
―
l
l l
―
l *1
―
l
l l
ENGLISH - 115
RS-232C
l
l
―
l
l