Table of Contents
Advertisement
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 71) for the operation of the menu screen.
[DIGITAL LINK MODE]
Switch the communication method of the <DIGITAL LINK/局域网> terminal of the projector.
1)
Press as to select [DIGITAL LINK MODE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[DIGITAL LINK]
[LONG REACH]
[ETHERNET]
Possible communication modes
l: Communication possible
—: Communication not possible
Setting
[AUTO]
[DIGITAL LINK]
[LONG REACH]
[ETHERNET]
*1 Communication via a twisted-pair-cable transmitter is not available. Connect the projector to the network directly.
Note
f For the signal with the resolution of 1 920 x 1 200 dots or less, the maximum transmission distance is 100 m (328'1") when connected with
the DIGITAL LINK communication method. For the signal with the resolution exceeding 1 920 x 1 200 dots, the maximum transmission
distance is 50 m (164'1").
f The maximum transmission distance when connected with the long-reach communication method is 150 m (492'2"). In this case, the signal
that the projector can receive is only up to 1080/60p (1 920 x 1 080 dots, dot clock frequency 148.5 MHz).
f If the communication method of the twist-pair-cable transmitter is set to long reach, the projector will connect with long-reach communication
method when the item is set to [AUTO].
f Even when the item is set to [LONG REACH], connection will not be made correctly if the twist-pair-cable transmitter is not supporting the
long-reach communication method.
[DIGITAL LINK STATUS]
Display the DIGITAL LINK connection environment.
1)
Press as to select [DIGITAL LINK STATUS].
2)
Press the <执行> button.
f The [DIGITAL LINK STATUS] screen is displayed.
[LINK STATUS]
[HDCP STATUS]
150 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Switches the communication method automatically to DIGITAL LINK, long reach, or Ethernet.
Fixes the communication method to DIGITAL LINK.
Fixes the communication method to long reach.
Fixes the communication method to Ethernet.
Video transfer
(100 m (328'1"))
For DIGITAL LINK
For long reach
For Ethernet
The content of display is as follows.
[DIGITAL LINK]: Communicating in the DIGITAL LINK method.
[LONG REACH]: Communicating in the long reach method.
[ETHERNET]: Communicating in the Ethernet method.
[NO LINK]: Communication is not established.
The content of display is as follows.
[HDCP2.2]: When protected with HDCP 2.2
[HDCP1.X]: When protected with HDCP 1.X
[NONE]: When not protected with HDCP
[---]: When there is no signal
Communication possible
Video transfer
(150 m (492'2"))
—
l
—
l
—
—
—
l
—
l
—
—
Ethernet
RS-232C
l
l
l
l
—
l
*1
l
l
l
l
—
l
*1
Advertisement
Table of Contents
