Managing the sub memory
list
You can restore the sub memory data when using
signals from the same input source. Sub memory data
contains the setting information of screen and image
adjustments, such as BRIGHTNESS, CONTRAST or
ASPECT.
Registering the current settings
J
to the list
1 )
In the normal screen (when the menu
is not displayed), press ◄► button.
The signal must be registered before creating a
z
sub memory data of the signal.
Displays the list of corresponding sub memory
z
data to the signal.
2 )
Press ▲▼◄► to select the required
sub memory data.
3 )
Press <ENTER> button.
The [ SIGNAL NAME] screen will be displayed.
z
4 )
Press <ENTER> button.
Note
For renaming a registered data, follow the same
z
procedure (steps 4 - 5) of "Renaming a registered data"
Æ
(
page 90).
Displaying the sub memory list
J
and restoring the settings
1 )
In the normal screen (when the menu
is not displayed), press ◄► button.
The [SUB MEMORY LIST] screen will be
z
displayed.
2 )
Press ▲▼◄► to select the required
sub memory data, and press <ENTER>
button.
The [REGISTERED SIGNAL STATUS] screen
z
will be displayed.
3 )
Press <ENTER> button.
Restores the settings in the data.
z
Deleting a sub memory data
J
1 )
In the normal screen (when the menu
is not displayed), press ◄► button.
The [SUB MEMORY LIST] screen will be
z
displayed.
2 )
Press ▲▼◄► to select the required
sub memory data, and press <ENTER>
button.
The [REGISTERED SIGNAL STATUS] screen
z
will be displayed.
SIGNAL LIST menu
3 )
Press <DEFAULT> button.
Displays the [SUB MEMORY LIST] with
z
change.
You can return to the previous step by pressing
z
<MENU> button.
91
ENGLISH -