Rgb In (Only Rgb Input); Dvi-D In; Rgb In - Panasonic PT-DS100XE Operating Instructions Manual

Adjusting the position
J
automatically
1. Select [POSITION ADJUST] in step 3).
2. Press ◄► to switch [POSITION
ADJUST].
The setting will change as follows each time
z
◄► is pressed.
OFF
OFF Automatic adjustment is off.
Screen position and size are
ON adjusted during AUTO SETUP
operation.
Adjusting the signal level
J
automatically
1. Select [SIGNAL LEVEL ADJUST] in
step 3).
2. Press ◄► to switch [SIGNAL LEVEL
ADJUST].
The setting will change as follows each time
z
◄► is pressed.
OFF
OFF Automatic adjustment is off.
The black level (On-screen menu
[BRIGHTNESS]) and white level
ON (On-screen menu [CONTRAST])
are adjusted during AUTO SETUP
operation.
Note
If the input image is not a still image with a clear
z
difference between black and white, the [SIGNAL LEVEL
ADJUST] function may not operate normally.

RGB IN

Change this setting to change the input impedance of
the synchronous signal input.
1 ) Press ▲▼ to select [RGB IN].
2 ) Press <ENTER> button.
The [
z
3 ) Press ▲▼ to select [RGB1 SYNC
ON
TERMINAL] or [RGB2 SYNC
TERMINAL].
4 ) Press ◄► to switch.
The setting will change as follows each time
z
◄► is pressed.
LOW
HIGH

DVI-D IN

Change this setting if video does not display normally
when the projector and an external device are
connected via DVI.
1 ) Press ▲▼ to select [DVI-D IN].
ON
2 ) Press <ENTER> button.
The [
z
3 ) Press ▲▼ to select [DVI EDID].
4 ) Press ◄► to switch [DVI EDID].
The setting will change as follows each time
z
◄► is pressed.
EDID3
EDID3
EDID1
EDID2 : PC
5 ) Press ▲▼ to select [DVI SIGNAL
LEVEL].
DISPLAY OPTION menu
(Only RGB input)
RGB IN] screen will be displayed.
LOW
Input impedance is set to [LOW].
Input impedance is set to [HIGH].
DVI-D IN] screen will be displayed.
EDID1
Switch between fine settings for a
moving image and for a still image.
Mainly select this when an external
device (DVD player, etc.) for
outputting video signals of a moving
image system is connected to DVI-D
IN.
Mainly use this when an external
device (PC, etc.) for outputting video
signals of a still image system is
connected to DVI-D IN.
HIGH
EDID2 : PC
73
ENGLISH -