Changing The Picture Aspect Ratio - Panasonic PT-DS100XE Operating Instructions Manual

Changing the picture aspect
ratio
You can toggle through an appropriate set of aspect
ratios for a given input signal.
button
Press <ASPECT> button on the remote
control.
The setting will change as follows each time
z
<ASPECT> button is pressed.
VID AUTO
*1
DEFAULT S1 AUTO
AUTO
*2
HV FIT
V FIT H FIT
*1 : VIDEO/S-VIDEO (NTSC) only
*2 : RGB1/RGB2 (480i, 480p) only
*3 : S-VIDEO (NTSC) only
Note
Some aspect ratios may not be available for selection
z
depending on the input signal.
Refer to "ASPECT" of "POSITION menu" (
details.
Basic operations using the remote control
VID AUTO
*3
(PRI.) *3
THROUGH
16 : 9
4 : 3
Æ
page 59) for
49
ENGLISH -