Screen Size And Throw Distance - Panasonic PT-DS100XE Operating Instructions Manual

Screen size and throw distance

When planning the projector and screen geometry, refer to the figures below and the information on the following
pages for reference. After the projector is roughly positioned, picture size and vertical picture positioning can be
finely adjusted with the powered zoom lens and lens shifting mechanism.
Projected image
L (LW/LT)
SH
SW
H
SD
: LW : Minimum distance
Û
LT : Maximum distance
Attention
Before installing, please read
z
Special care should be used when DLP projectors are used in the same room as high power laser equipment.
z
Direct or indirect hitting of a laser beam on to the lens can severely damage the Digital Mirror Devices ™ in which case
there is a loss of warranty.
SW
Projection distance (m)
Û
Height of the projection area (m)
Width of the projection area (m)
Vertical distance between the lens center level and the
bottom edge of the projected image. (m)
Diagonal length of the projection area (m)
"Precautions with regard to safety" (
Screen
L (LW/LT)
L (LW/LT)
Screen
Æ pages 9 to 17)
Setting up
23
ENGLISH -