Panasonic PT-DS100XE Operating Instructions Manual page 80

PROJECTOR SETUP menu
When [MODE] of brightness control is
Q
[OFF]
The state that the brightness control is OFF is
displayed.
BRIGHTNESS CONTROL STATUS
MODE
PROJECTOR2
RETURN
MENU
The name of this projector is displayed.
When [MODE] of brightness control is
Q
[AUTO] and [LINK] is [OFF]
The state that the LINK is OFF is displayed.
BRIGHTNESS CONTROL STATUS
LINK
PROJECTOR2
RETURN
MENU
The name of this projector is displayed.
The state is indicated by color.
GREEN : The brightness can be corrected by a
significant margin.
YELLOW : The brightness can no longer be
corrected by a significant margin.
RED : There is an error in brightness control.
80
- ENGLISH
OFF
OFF
When [MODE] of brightness control
Q
is set to [AUTO] and [LINK] is set to
[GROUP A - D]
The brightness control of up to 8 projectors linked
with each other, including the projector operated
using the on-screen menu, is displayed.
BRIGHTNESS CONTROL STATUS
LINK GROUP A
PROJECTOR2 192.168. 0. 9
1: PROJECTOR1 192.168. 0. 8
2: PROJECTOR3 192.168. 0. 10
3:
4:
5:
6:
7:
UPDATE
MENU SELECT
The group to be linked is displayed.
The name and IP address of this projector are
displayed.
The projector name and IP address of the
same group detected through the network are
displayed.
The state is indicated by color.
GREEN : The brightness can be corrected by a
significant margin.
YELLOW : The brightness can no longer be
corrected by a significant margin.
RED : There is an error in brightness control.
An error message is displayed.
The information is updated.
If the message of [Failed to apply BRIGHTNESS
CONTROL to some projectors.] is displayed, the
projectors indicated in red are not linked.
Press ▲▼ to select a projector indicated in red,
then press <ENTER> button to display the details
of the error.