Control Panel - Panasonic PT-DS100XE Operating Instructions Manual

About Your Projector

CONTROL PANEL

J
<STANDBY> button
Returns to the standby mode.
<POWER ON> button
Starts the projection while in the
standby mode.
VIDEO
Switches to VIDEO input.
S-VIDEO
Switches to S-VIDEO input.
RGB1
Switches to RGB1 input.
RGB2
Switches to RGB2 input.
DVI-D/HDMI
Switches to DVI-D or HDMI input.
SDI
Switches to SDI input.
(PT-DZ110XE/PT-DS100XE only)
Terminals on side
J
REMOTE 2 IN
Connect a cable from an
external control circuit.
REMOTE 1 IN/OUT
When two or more main
units are used in the system,
they can be connected and
controlled with wired remote
control cable.
SDI IN
Connect an SDI signals.
(PT-DZ110XE/PT-DS100XE
only)
HDMI IN
Connect a HDMI signals.
VIDEO IN
Connect a VIDEO signals.
S-VIDEO IN
Connect an S-VIDEO signals.
Attention
Do not touch the LAN terminal with your bare hands or body, as body parts may have charged static electricity. Failure to
z
do so may cause malfunctions.
Do not touch the metallic parts of LAN terminal and cable.
Please connect the LAN to indoor devices only.
z
20
- ENGLISH
<MENU> button
Displays and clears the main menu, and returns to the previous
menu when the menu is displayed.
If you hold it down for at least 3 seconds while the on-screen
indication is [OFF], the [OFF] state is canceled. (
<LENS> button
This button is used together with ▲▼◄► to
adjust focus, zoom and shift by the projection
lens.
<ENTER> button
Press to activate a menu selection or to initiate a
function.
<SHUTTER> button
Pressing this button toggles the projector's
internal mechanical shutter to black out the
projector. ( Æ page 47)
▲▼◄► button
Use these buttons to select menu items,
change settings, adjust levels, and to enter the
[SECURITY] password.
<AUTO SETUP> button
Pressing this button while projecting an image
automatically corrects the picture positioning on
the screen. While the auto setup feature is active,
a message "PROGRESS" appears on the screen.
( Æ page 48)
SERIAL IN/OUT
Connect an RS-232C cable from/to a computer.
DVI-D IN
LAN
RGB2 IN
Connect an RGB or YP
RGB (YP P )1 IN
B R
Connect an RGB or YP
Æ page 50)
Connect a single link DVI-D
signals.
Connect a LAN cable for network
connection.
P signals.
B R
P signals.
B R