Frame Delay; Raster Position; Default - Panasonic PT-DS100XE Operating Instructions Manual

FRAME DELAY

When 1 080/60i, 1 080/50i and 1 080/24sF signals are
being input, this simplifies image processing so that
the video frame delay is shortened.
1 ) Press ▲▼ to select [FRAME DELAY].
2 ) Press ◄► to switch [FRAME DELAY].
The setting will change as follows each time
z
◄► is pressed.

DEFAULT

DEFAULT This is the standard setting.
Shortens the delay at the expense of
SHORT
some picture quality.
Note
When [FRAME DELAY] is set to [SHORT], deterioration
z
in the picture quality will occur. Furthermore, the noise
reduction function cannot be used.

RASTER POSITION

When the scaler is set such that the image is smaller
than the display area, the image can be moved to any
position inside the display area.
1 ) Press ▲▼ to select [RASTER
POSITION].
2 ) Press <ENTER> button.
The [RASTER POSITION] screen will be
z
displayed.
3 ) Press ▲▼◄► to adjust the position.
SHORT
ADVANCED MENU
ENGLISH -
67