Changing The Picture Aspect Ratio - Panasonic DLP PT-D12000E Operating Instructions Manual

Basic operations using the remote control (continued)
Changing the picture
aspect ratio
You can change the aspect ratio for projected
pictures to match the input signal.
1. Press ASPECT on the remote
control.
• The setting will change as follows each time
ASPECT is pressed.
VID AUTO (PRI.)
S1 AUTO
VID AUTO
HV FIT
V FIT
Note
• Some aspect ratios may not be available for
selection depending on the input signal. Refer to
"Adjusting the aspect ratio" for details. (p. 61)
50 – ENGLISH
DEFAULT
THROUGH
16:9
4:3
H FIT