Basic operations using the remote control
Changing the picture aspect
ratio
You can toggle through aspect ratios to select the one
that is appropriate for the input signal.
button
Press the <ASPECT> button on the
remote control.
z The setting will change as follows each time the
button is pressed.
[VID AUTO]
*1
[DEFAULT]
[HV FIT]
[V FIT]
[H FIT]
*1: VIDEO, S-VIDEO (NTSC) only
*2: S-VIDEO (NTSC) only
Note
z Some aspect ratios may not be available depending
on the input signal.
Refer to "[ASPECT]" (
40 - ENGLISH
[S1 AUTO]
*2
[VID AUTO(PRI.)]
[THROUGH]
[16:9]
[4:3]
page 48) for details.
*2