Changing The Picture Aspect Ratio - Panasonic PT-DZ770E Operating Instructions Manual

Changing the picture aspect
ratio
You can toggle through aspect ratios to select the one
that is appropriate for the input signal.
button
Press the <ASPECT> button on the
remote control.
▶
z The setting will change as follows each time
you press the button.
[VID AUTO]
*1
[S1 AUTO]
[DEFAULT]
[HV FIT]
[V FIT]
[H FIT] [4:3]
*1: For video signal and S video (NTSC) signal input only
*2: For S video (NTSC) signal input only
*3: For RGB (480i or 480p) signal input only
Note
z Some aspect ratios may not be available depending
on the input signal.
Refer to "[ASPECT]" (

*2 [VID AUTO(PRI.)] *2
[AUTO]
*3
[THROUGH]
[16:9]
page 51) for details.
Remote control operation
ENGLISH - 43