Basic Operations By Using The Remote Control; Using The Auto Setup Function; Switching The Input Signal; Using The Screen Button - Panasonic PT-TW230EA Operating Instructions Manual

Basic operations by using the remote control

Using the Auto setup function

This function allows you to automatically adjust Input
search and Auto PC adj. during signal input from a
computer.
button
Press the <AUTO SETUP> button on the
remote control.
Note
For details, see "Setting" of Main menu. (
z

Switching the input signal

You can switch the input signals to project.
Press (<COMPUTER 1>,<COMPUTER
2>, <HDMI>, <VIDEO>, <S-VIDEO>, or
<COMPONENT>) buttons on the remote
control.
Æ page 50)
buttons
Switches to Computer 1(RGB)/
COMPUTER 1
Computer 1(Scart) input.
Switches to Computer 2(RGB)
COMPUTER 2
input.
HDMI Switches to HDMI input.
VIDEO Switches to Video input.
S-VIDEO Switches to S-video input.
Switches to Computer 1
COMPONENT
(Component) input.
Note
Each press of the <INPUT> button on the Control panel
z
of the main unit switches the settings as shown below.
Æ
( page 19)
Computer 1 (RGB)/
*
Computer 1 (Component)/
Computer 1 (Scart)
S-video
*
It depends on the item you selected in the
[Computer 1] submenu of the [Input] menu.

Using the SCREEN button

This function allows you to select screen mode or
change the screen size.
button
Press the <SCREEN> button on the
remote control.
Note
For details, see "Screen" of Main menu. (
z
Computer 2
(RGB)
HDMI
Video
Æ
page 46-48)
ENGLISH -
31