Basic operations by using the remote control
Using the Auto setup function
This function allows you to automatically adjust Input
search and Auto PC adj. during signal input from a
computer.
button
Press the <AUTO SETUP> button on the
remote control.
Note
For details, see "Setting" of Main menu. (
z
Switching the input signal
You can switch the input signals to project.
Press (<COMPUTER 1>,<COMPUTER
2>, <HDMI>, <VIDEO>, <S-VIDEO>, or
<COMPONENT>) buttons on the remote
control.
32
- ENGLISH
Æ
page 52)
buttons
Switches to Computer 1(RGB)/
COMPUTER 1
Computer 1(Scart) input.
Switches to Computer 2(RGB)
COMPUTER 2
input.
HDMI
Switches to HDMI input.
VIDEO
Switches to Video input.
S-VIDEO
Switches to S-video input.
Switches to Computer 1
COMPONENT
(Component) input.
Note
Each press of the <INPUT> button on the Control Panel
z
of the main unit switches the settings as shown below.
Æ
(
page 19)
Computer 1 (RGB)/
Computer 2
*
Computer 1 (Component)/
Computer 1 (Scart)
S-video
*
It depends on the item you selected in the
[Computer 1] submenu of the [Input] menu.
Using the SCREEN button
This function allows you to select screen mode or
change the screen size.
button
Press the <SCREEN> button on the
remote control.
Note
For details, see "Screen" of Main menu.
z
Æ
(
page 48 to 50)
(RGB)
HDMI
Video