Basic Operations By Using The Remote Control; Using The Auto Setup Function; Switching The Input Signal; Using The Screen Button - Panasonic PT-VW430EA Operating Instructions Manual

Basic operations by using the remote control

Using the AUTO SETUP
function
This function allows you to automatically adjust
Input search, Auto Keystone correction and Auto PC
adjustment during signal input from a computer.
button
Press the <AUTO SETUP> button on the
remote control.
Note
For details, see "Setting" of Main menu. (
z

Switching the input signal

You can switch the input signals to project.
Press (<COMPUTER 1>,<COMPUTER
2>, <HDMI>, <VIDEO>, <S-VIDEO>, or
<COMPONENT>) button on the remote
control.
32
- ENGLISH
Æ page 52)
buttons
Switch to Computer 1(RGB)/
COMPUTER 1
Computer 1(Scart) input.
COMPUTER 2 Switch to Computer 2(RGB)input.
HDMI Switch to HDMI input.
VIDEO Switch to Video input.
S-VIDEO Switch to S-video input.
Switch to Computer 1
COMPONENT
(Component) input.
Note
Each press of the <INPUT> button on the Control Panel
z
of the main unit switches the settings as shown below.
Æ
( page 19)
*1
Computer 1 (RGB)/
Computer 1 (Scart)/
Computer 1 (Component)
S-video
*1: It depends on the item you selected in the [Computer 1]
submenu of the [Input] menu.
*
2: When [Monitor out] is selected in the [Terminal] of the
setting menu, [Computer 2(RGB)] can not be selected.
Pressing <COMPUTER 2> button on the remote control
displays [Monitor out].

Using the SCREEN button

This function allows you to select screen mode or
change the screen size.
button
Press the <SCREEN> button on the
remote control.
Note
For details, see "Screen" of Main menu. (
z
*2
Computer 2
(RGB)
HDMI
Video
Æ page 48)