Permit A Blackberry Enterprise Server To Connect To A Remote Blackberry Router - Blackberry PRD-10459-016 - Enterprise Server For MS Exchange Administration Manual

Administration Guide
10. Repeat steps 2 to 9 for each BlackBerry Enterprise Server instance in your organization's environment that you want
to have use a BlackBerry Router pool.
Related information
Remove a BlackBerry Router instance from a pool,
Restarting BlackBerry Enterprise Server components,
Permit a BlackBerry Enterprise Server to connect to a
remote BlackBerry Router
If you installed a BlackBerry Router on a computer that is separate from the computer that hosts a BlackBerry Enterprise
Server, you must permit the BlackBerry Dispatcher that you installed with the BlackBerry Enterprise Server to connect to
the BlackBerry Router. The BlackBerry Router that you installed on a separate computer can send data packets from the
BlackBerry Enterprise Server to BlackBerry devices.
1. On the computer that hosts the BlackBerry Router, click Start > Run.
2. Type regedit.
3. Click OK.
4. Perform one of the following actions:
• If you are running a 32-bit version of Windows, navigate to \\HKEY_LOCAL_MACHINE\SOFTWARE\Research In
Motion\BlackBerryRouter.
• If you are running a 64-bit version of Windows, navigate to \\HKEY_LOCAL_MACHINE\SOFTWARE
\WOW6432Node \Research In Motion\BlackBerryRouter.
5. Verify the value of AllowRemoteServices is 1.
6. If you want to change the port number that the BlackBerry Router uses to open connections to the BlackBerry
Dispatcher, change the value of ServicePort to the port number that the BlackBerry Router should use, for example,
port number 80. By default, the port number is 3101.
7. In the Windows Services, restart the BlackBerry Router service.
Configuring high availability for BlackBerry Enterprise Server components
124
392
117