Configure When Corrective Calendar Synchronization Runs - Blackberry PRD-10459-016 - Enterprise Server For MS Exchange Administration Manual

Administration Guide
• To check for calendar synchronization errors during a specific range of days in the calendar for all user accounts,
type traittool -global -trait ExchangeSmartSyncDays -set
5. Press ENTER.
Example: To configure corrective calendar synchronization to check calendar entries for the period of three days from
the current date for all users, type:
traittool -global -trait ExchangeSmartSyncDays -set 3
Configure when corrective calendar synchronization
runs
You can configure corrective calendar synchronization to start running at a specific hour, on recurring days, or on only one
recurring day. To specify more than one value for when corrective calendar synchronization runs, after you extract the
BlackBerry Enterprise Server installation files to the computer, you can create a list of values that are separated by
commas (,) at the command prompt.
1. Copy the BlackBerry Enterprise Server installation files to a computer that hosts a BlackBerry Enterprise Server
instance.
2. Extract the contents to a folder on the computer.
3. At the command prompt, navigate to the folder that the TraitTool.exe file is located in.
4. Perform one of the following actions:
• To configure calendar synchronization to occur at a specific hour for a specific user account, type traittool -user
<smtp_address> -trait ExchangeSmartSyncTriggerHour -set <value> , where <value> is a number from 0 to 23,
0 is 12:00 AM, and 23 is 11:00 PM. The default value is 0, which is 12:00 AM.
• To configure calendar synchronization to occur at a specific hour for all user accounts that are associated with a
BlackBerry Enterprise Server, type traittool -server
<value> , where <value> is a number from 0 to 23, 0 is 12:00 AM, and 23 is 11:00 PM. The default value is 0,
which is 12:00 AM.
• To configure calendar synchronization to occur at a specific hour for all user accounts, type traittool -global -trait
ExchangeSmartSyncTriggerHour -set
is 11:00 PM. The default value is 0, which is 12:00 AM.
5. Press ENTER.
6. Perform one of the following actions:
• To configure calendar synchronization to recur on specific days for all user accounts, type traittool -global -trait
ExchangeSmartSyncSchedule -set
<value> , where <value> is a number from 1 to 365.
<server_name> -trait ExchangeSmartSyncTriggerHour -set
<value> , where <value> is a number from 0 to 23, 0 is 12:00 AM, and 23
<value> , where <value> is one or more of the following options: Monday,
Managing calendars
379