Blackberry PRD-10459-016 - Enterprise Server For MS Exchange Administration Manual page 194

Administration Guide
Configure the LDAP servers that the BlackBerry MDS Connection Service
uses to retrieve certificates
You can create a user name and password so that the BlackBerry MDS Connection Service can authenticate to LDAP
servers on behalf of BlackBerry devices.
If you change the LDAP port number or host server information, you must stop and restart the BlackBerry MDS Connection
Service so that the BlackBerry MDS Connection Service can use the new port number or host server information
immediately.
1. In the BlackBerry Administration Service, on the Servers and components menu, expand BlackBerry Solution
topology > BlackBerry Domain > Component view.
2. Click MDS Connection Service.
3. On the LDAP tab, click Edit component.
4. Perform one of the following tasks:
Task
Create an LDAP server
configuration.
Change an existing LDAP server
configuration.
5. Click Save all.
After you finish:
• To configure the BlackBerry MDS Connection Service to retrieve the status of certificates, configure the OCSP and CRL
server information.
• Add the communication information that you configured for the LDAP server to the BlackBerry MDS Connection
Service configuration set.
Related information
Add communication information to a BlackBerry MDS Connection Service configuration set,
Assign a BlackBerry MDS Connection Service configuration set to a BlackBerry MDS Connection Service instance,
Restarting BlackBerry Enterprise Server components,
194
Configuring how users access enterprise applications and web content
Steps
1. In the Name field, type the LDAP server name.
2. In the Service URL field, type the web address for the server.
3. In the Settings section, configure the LDAP server settings.
4. Click the Add icon.
1. Click the Edit icon beside the LDAP server.
2. In the Settings section, change the LDAP server settings.
3. Click the Update icon.
392
198
199