Configuring An Ip Slas Operation With Endpoint Discovery - Cisco Catalyst 4500 series Administration Manual

Chapter 66 Configuring Ethernet OAM and CFM
Target domain: abc
Target MPID: 23
Target VLAN ID: 5
Request size (Padding portion): 0
Operation timeout (milliseconds): 5000
Class Of Service parameters: 0
Schedule:
Threshold (milliseconds): 5000
Distribution Statistics:
Enhanced History:
History Statistics:
Switch#

Configuring an IP SLAs Operation with Endpoint Discovery

To use IP SLAs to automatically discover the CFM endpoints for a domain and VLAN ID, perform this
task. You can configure ping or jitter operations to the discovered endpoints.
Command
Step 1
Switch# configure terminal
Step 2
Switch(config)# ip sla ethernet-monitor
operation-number
OL-28731-01
Operation frequency (seconds): 60
Next Scheduled Start Time: Start Time already passed
Group Scheduled : FALSE
Randomly Scheduled : FALSE
Life (seconds): 3600
Entry Ageout (seconds): never
Recurring (Starting Everyday): FALSE
Status of entry (SNMP RowStatus): Active
Number of statistic hours kept: 2
Number of statistic distribution buckets kept: 1
Statistic distribution interval (milliseconds): 20
Number of history Lives kept: 0
Number of history Buckets kept: 15
History Filter Type: None
Purpose
Enters global configuration mode.
Begins configuration of an IP SLAs automatic Ethernet
operation, and enter IP SLAs Ethernet monitor
configuration mode.
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
Configuring Ethernet CFM
66-21