Problems And Solutions; Error Messages - HP D5970A - NetServer - LCII Installation And Configuration Manual

Problems and Solutions

I made changes to the host adapter configuration and Windows
2000 no longer boots!
The boot manager for Windows 2000 contains recovery logic to allow you to
return to the last known good configuration. If you have changed your host
adapter configuration and Windows 2000 no longer boots, follow these steps to
recover:
1. Undo any hardware changes you have made to the computer since it was last
operational.
2. Reboot the computer. Watch the display carefully during bootup. When you
see the message Starting Windows... appear at the bottom of the screen,
press F8. This opens the Windows 2000 Advanced Options menu. Select the
Last Known Good Configuration option and select a boot profile.
3. Once your computer is operational again, check all of the hardware and
software configuration changes you want to make. Look specifically for
conflicts with parts of the existing system configuration that are not being
changed.

Error Messages

Error messages generated by the Windows 2000 Driver Set can be viewed by
opening the Windows 2000 Event Viewer error logs.
To view events generated by the driver, follow these steps:
1. Double-click the Event Viewer icon in the Administrative Tools program
group.
Error messages generated by the driver show up as Event ID 11. Error messages
generated by the SCSI port show up as Event ID 9.
2. To view event details, select System Log from the Event Viewer tree.
Double-click the appropriate Windows 2000 driver event that has an Event
ID of 11. (There may be none or multiple driver events.)
The top portion of the Event Detail dialog box displays information such as the
time that the event was generated, the computer on which the event occurred (in
case of remote monitoring), and the description of the event. The Data section
of the Event Details dialog box displays the error messages generated.
43